Base+ Work 64x94cm Antraciet
- The open structure ensures that water and other liquids are drained away immediately, keeping the mat dry and non-slip.
Do you work in a damp environment? Then choose the Base+ Work with a dotted texture for extra grip.
Read moreSpecifications
| Available as | Mats |
|---|---|
| Colour | Anthracite |
| Basic material composition | Polyurethaan |
| Backing | 100% Polyvinylchloride |
| Type of mat | Anti Fatique |
| Total height | 15 mm |
| Breedte | 64 cm |
| Lengte | 94 cm |
| Anti-slip | Yes |
Description
In environments where floors can become wet, such as commercial kitchens, swimming pools, rinsing areas or production areas in the food industry, safety underfoot is essential. Static mats or slippery floors quickly pose a risk of slipping, standing water and unhygienic situations.
That is why we have developed a special safety mat with an open structure.
-
The Work has a perforated surface, allowing water, oil or other liquids to drain away immediately
-
A structure that increases the contact surface, which improves grip, even with wet footwear
-
Made from quick-drying, slip-resistant materials
Veelgestelde vragen
Comfort & Ergonomics
The Base+ Work is an ergonomic anti-fatigue mat featuring a soft polyurethane (PU) surface and backing in anthracite. Measuring approximately 64 × 94 cm and 15.0 mm thick, it is designed for workplaces where people stand for extended periods.
The mat compresses by 5.61 mm under load and then returns almost completely to its original shape. The soft PU surface provides a comfortable underfoot feel during prolonged standing work.
15.0 mm, as measured by the testing laboratory after conditioning.
Excellent. After loading and 150 minutes of recovery, only 0.03 mm of permanent deformation remains.
The average Shore A hardness is 29, making it significantly softer than a typical rubber mat. This provides a highly comfortable, cushioning surface underfoot.
Safety & Performance
Yes. The ramp test resulted in a value of 19°, corresponding to an indicative slip-resistance classification of R10.
Yes. The average body voltage measured 0.3 kV, well below the requirement of ≤ 2.0 kV.
Yes. After 5,000 cycles, the mat achieved a rating of 4.5 out of 5, and after 20,000 cycles it maintained a rating of 4.0 out of 5.
Yes, it is well suited for light to medium-duty industrial workplaces. However, caution is advised when using acetone or paint thinner nearby.
Maintenance & Durability
The average wear point is 4,600 revolutions according to ISO 24338 Procedure A.
Hardly at all. After 20,000 cycles, the thickness loss is only 0.05 mm.
Generally yes. Acetone and paint thinner should be avoided. Bleach and concentrated PU cleaners cause slight deterioration, while all other tested substances showed no adverse effects.
Yes. The mat was tested by TÜV Rheinland Nederland B.V. (NB 0336). Test reports: 89226449-003 and 89226449-004, dated 4 May 2026.